 |
|
|
| Product Description |
| |
- Cubical form housing for symmetry.
- Gear ratios 1:1, 1.5:1 and 2:1.
- 8 different sizes for maximum output torque ranging from 17 Nm to 3550 Nm.
- Fully machined with tapped holes for universal mounting, thus 6 possible mounting positions.
- 1 input with 1,2,or 3 outputs, hollow outputs.
- motor flange for direct mounting of motors (up to FG55).
- Either direction of rotation.
- Mounting base for fastening outside the Cubical form.
- Efficiency 95-96 % depending upon Lubrication.
- Oil or grease filling.
- 'O' Rings /oil seals at all joints.
- Tapered roller bearings for high radial & Axial load capacity, long life.
- Spiral bevel gears(Gleason System) for FG60 & FG75.
|
| |
|
| Materials of Construction |
| |
- For 14000 & 30,000 lbs, Housing is made of closed grain cast-iron, for higher sizes, SG 500/7 material.
- Screw made of Cr-Mo medium Carbon Steel, hardened and tempered for high core strength.
- Nut made of aluminum bronze to British Standard grade AB2.
- Bevel gears Case hardened.
- Tapered roller bearings to carry heavy axial as well as radial loads.
|
| |
Product Catalogue  |
|
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
